Manual power control
Adjust the manual power settings of your flash units in up to three zones (groups). You can display as many flashes as you like in each group.
HSS
With Panasonic's High Speed Sync (HSS) mode, enhanced by PocketWizard's ControlTL technology, you get more light, faster recycle times and more shots per battery. Now you can take advantage of this great feature and use remote flashes shoot far in full sun.
HyperSync®
With HyperSync, photographers can achieve X-sync speeds faster at full flash power. Now you can cut off ambient light and shoot open apertures in bright sunlight outdoors. This extra speed can also freeze motion, whether you are shooting models or athletes in movement.
* The performance of each camera/flash system varies.
PocketWizard compatible
Works with all PocketWizard radios on the same frequency, including PocketWizard OEM partner products such as Sekonic meters and Profoto, Bowens, Calumet, Dynalite, Lumedyne, Norman and Photogenic flash packs for standard triggering and HyperSync.
PocketWizard utility
Using a standard USB connection and the free PocketWizard utility, you can easily configure your channel settings, choose your HyperSync timing, adjust your sleep mode timers, and update your product to the latest firmware as updates become available.
Auto-sensing transceiver technology
With PocketWizard's Auto-Sensing Transceiver technology, the FlexTT5 transceiver can automatically switch between transmit mode and receive mode to provide greater flexibility in operation.
auto-relay mode
Simply trigger a remote camera in sync with a remote flash in auto relay mode. Place a camera somewhere you can't be and use either external TTL lighting or non-TTL lighting, or both at the same time.
ZoneControl
Use your Panasonic camera's flash menus to control the output of up to 3 light groups (zones).
camera / flash ports
The FlexTT5 transceiver features two plug-in connectors for use with remote cameras and other flash packs. Auto Relay mode allows the FlexTT5 to trigger a remote camera and transmit to a remote flash at the same time.
TTL compatibility:
Panasonic TTL compatible - Visit http://wiki.pocketwizard.com for updated compatibility list
Frequency:
340.00 - 354.00 MHz US FCC/IC
433.42 - 434.42 MHz CE
Channels:
52 channels over 26 frequencies (FCC / IC)
35 channels over 5 frequencies (CE)
Antenna:
2.7" (6.9 cm) rubberized with 180 degree swing
Output power transmitted:
Less than 0.001 watts (1/1000 watt or 1 milliwatt)
Range Performance:
Comparable to other PocketWizard radios (Actual range depends on several factors including equipment, mode, environment, position
orientation and interference)
Assembly:
hot shoe, 1/4-20, lanyard, velcro fastener
Maximum recording rate frames per second (fps)
TTL mode: Within 1 FPS of the camera's maximum FPS
* depending on the flash power settings
FPS = frames per second
Power / Channel switch
AUS - C.2 - C.1
Zone Select switch
ABC (corresponds to Panasonic groups / zones)
status display
LED: Status indicators green, yellow, red
camera / P1 port
Stereo miniphone (3.5 mm) for 2-stage remote triggering of the camera. Port voltage handling: up to 50 volts, 100 mA continuously
Tip = Trigger
Ring = Pre-Trigger
sleeve = bottom
Note: only for triggering the camera. Do not connect a flash to this port.
Flash / P2 connector
3.5 mm mono miniphone. Port voltage handling: up to 200 volts, 4 amps peak, 250 mA continuous, non-polarized
Minimum reception contact time
Camera / P1 port = 80 milliseconds
Flash / P2 port = 500 milliseconds
voltage present
3.3 VDC (all pins) - safe for all cameras
Hot Shoe Voltage Protection:
Hot Shoe: up to 50 volts
USB:
USB 2.0 compatible, mini-B connector, 5 V DC regulated, 100 mA, pin 1 positive, pin 4 ground
operating temperature
Above -15 ° C (5 ° F) and below 50 ° C (120 ° F).
storage temperature (without battery)
Above -30 ° C (-22 ° F) and below 85 ° C (185 ° F)
construction
plastic cap, captive battery compartment
Hot Shoe made of glass fiber reinforced resin
Performance
Two (2) AA (IEC: LR6) alkaline are recommended, other chemicals (NiMH, NiCAD, Lithium) are acceptable, USB
battery life
30+ hours
Mass
3.6" (9.2 cm) long x 2.9" (7.3 cm) wide x 1.4" (3.6 cm) high, antenna lowered
Weight
5.4 oz (153 g) 3.8 oz (108 g) without batteries "
Find answers to all your trigger system questions in our PocketWizard Jargon Buster !
